Error Resolution

Common error codes include issues like communication errors, sensor malfunctions, or system overload. These errors can often be resolved by resetting the unit, checking for loose connections, or contacting a professional technician for diagnosis and repair.

If your air conditioner is showing errors related to temperature control, ensure the thermostat settings are accurate, check for blockages in the air vents, and verify that the temperature sensors are functioning correctly. Adjusting the settings and ensuring proper airflow can often resolve temperature-related errors.

Low refrigerant levels can lead to cooling issues and system inefficiency. In such cases, it is important to inspect for leaks, recharge the refrigerant if necessary, and have the system checked by a professional to identify and fix the underlying cause of the refrigerant loss.

Error messages indicating airflow restrictions may be resolved by checking and cleaning the air filters, ensuring proper ventilation around the unit, and inspecting the ductwork for obstructions. Maintaining unrestricted airflow is essential for optimal system performance.

Compressor failure errors require immediate attention to prevent further damage to the system. Contact a qualified technician to diagnose the issue, assess the compressor’s condition, and perform any necessary repairs or replacements to restore the system’s functionality.

Regular maintenance, including cleaning or replacing air filters, inspecting electrical connections, and scheduling professional servicing, can help prevent recurring error codes. Following manufacturer recommendations for system care and maintenance can minimize the likelihood of errors and ensure optimal performance.

Smart air conditioning systems may require additional troubleshooting steps, such as resetting the system, updating firmware or software, and checking connectivity settings. Consult the system manual or contact the manufacturer’s customer support for guidance on resolving smart technology-related errors.

About Kanion Air Conditioner

Residential Air Conditioners (Full product range and capacities, more details follow below) Light Commercial Air Conditioners (Full product range and capacities, more details follow below) Heavy Commercial Air Conditioners (Full product range and capacities, more details follow below) Solar Air Conditioners (Wall split & Duct split Hybrid solar, Wall split & duct split 100% off-grid solar, more details follow below).
Residential air conditioners are the most common air conditioners and are used all around the world in residencies. Residential air conditioners are designed for a personal use and the major types include Ductless wall split type, Portable / Mobile type, Window / Room type, Floor standing type, Multiple split type & also dehumidifiers.
Light commercial air conditioners are mainly designed to meet the needs of a wide range of small to medium businesses, such as offices, shops, hotels, restaurants, coffee shops and most of public facilities. Light commercial air conditioning offer flexibility as they can be installed on the floor, on the ceiling, on the wall and basically any other place within a space and they Increase employees’ productivity by making the workspace more comfortable. The major types of light commercial air conditioners include Duct type, Ceiling cassette type, Floor & ceiling type, Multiple type & Packaged Terminal Air Conditioner (PTAC).
Heavy commercial air conditioners are suitable to supply the right climate conditions to large spaces or whole buildings, such as commercial centres, shopping malls, big hotels, sports centres, hospitals and other public facilities meant for larger number of visitors. Major heavy commercial air conditioners types include the Air handler, Commercial duct type, Rooftop package, VRF and Water chillers.
A solar air conditioner can combine solar as well as electricity or only solar power, depending on the type. In simple words, it takes energy from the Sun and uses it to power your AC to cool your space or keep it warm. There are two different types of solar air conditioners, hybrid solar air conditioner and 100% off-grid solar air conditioners.

Hybrid solar air conditioners are connected to solar panels and the power grid, switching between the two through a smart system, so that they never run out of power but take full advantage of any solar energy available in the environment.

100% off-grid solar air conditioners are connected to a sufficient number of solar panels so that they can run continuously on solar power, using no grid power at all.

Solar panel is a device that captures the power of the Sun. It converts the Sun rays into electrical energy. This energy can then be used directly or stored in a battery. This is known as DC power. A solar-powered air conditioner then uses this DC power, either directly as DC or after conversion into AC (using an inverter), to cool your space or keep it warm.
Kanion air conditioners come with standard incoterms limited warranty, 5 years for compressor and 2 years for other parts. Kanion provides 1% free spare for each container of air conditioners.
Kanion air conditioners come with a self- diagnosis system. This basically means that the air conditioner determines most the troubles on its own and provides an error code on the LCD screen, then based on information from the user’s manual, it is easier and faster for the user to follow the steps and solve the trouble at home. Furthermore our local representatives are always available to assist with troubleshooting. Additionally, Kanion Service and Support Department provides assistance for any issue, customers may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.

In between schedule maintenance visits, here are some things to be aware of that can help improve the efficiency of an air conditioner.


Clean the air filters
The most important maintenance task that will improve the efficiency of the air conditioner is to routinely replace or clean the air filters. Replace one-inch pleated filters once a month. If you’re unsure of the type of filter to use, the Kanion distributor might help you in the task, alternatively customers may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.


Clean the air conditioner’s coils
The air conditioner’s evaporator and condenser coils collect dirt over time. This dirt reduces airflow and insulates the coil, reducing its ability to absorb heat. Outdoor condenser coils can also become very dirty if the outdoor environment is dusty or if there is foliage nearby. To avoid these problems, the Kanion distributor will check and clean the air conditioner’s coils, if necessary, at your annual maintenance visit.


Remove debris from the unit
Over time, things like leaves, dirt and grass clippings will build up on the outside of the air conditioner, decreasing system capacity and reducing airflow. You should trim any shrubs or other plants back from around the air conditioner to keep from impeding airflow to and from the unit.

For Europe: CE, Eurovent, RoHS & ISO
For North America: ETL, AHRI, Energy Star, Neep, UL
For South America, Africa, Middle East & the rest of the world: ISO, ETL, UL, CE, AHRI, RoHS, SASO & IECEE among others.
Customers may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.
For European Union, the UK and Greater European Region: 220V – 240V / 50Hz
For the Americas: 115V or 230V / 60Hz or 50Hz depending on capacity and the country
For Africa, Middles East & the rest of the world: 220V – 240V / 50Hz or 60Hz depending on the country
Kanion products available more a hundred countries around the world, for instance, the USA, Canada, Central and many South America countries, European Union and Greater European countries, the UK, Africa countries such as Kenya, Mauritius, Ghana, Tanzania, Morocco & Zambia, In the Middle East and in Central & South East Asian countries. If a customer wished to become a Kanion products representative, may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.
Kanion air conditioners showrooms and selling points span across various locations globally. For more information for a specific location or country customers may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.

Ordering Kanion Air Conditioner

Almost every country in the world have special climate conditions and air conditioning products must be produced based on those conditions, to operate properly. Furthermore there are import, certification, safety compliance, energy efficiency and environmental regulations that need to be met per country or greater region, so the best way to choose the right air conditioner, is to let the Kanion sales team to direct you to the right pool of choices. Let us know your country and we will take you right away to the right air conditioner category.
In order to provide the best possible products at the friendliest price, Kanion Group has set a minimum order quantity. For Deluxe Series, minimum order quantity is 50 sets / pieces per capacity, for Prime Series the minimum order quantity is 100 sets / pieces per capacity for 9,000BTU & 12,000BTU and 50 sets / pieces per capacity for 18,000 & 24,000BTU. For more details about Kanion minimum order quantity policies please get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.
Customers are welcome to place sample orders to test Kanion quality before they proceed with full order. The sample are usually produced faster than full orders and can be dispatched by courier or shipment.
Peak Season, October to March: After the order is placed it will take between 35-40 days to be fully produced, packed and ready to ship.
Low Season, April to September: After the order is placed it will take between 30 days to be fully produced, packed and ready to ship.
Production process: Includes collection of raw materials, finalisation of artworks, assembly, testing of quality and efficiency & packaging, before it is ready for shipment.
Customers are welcome to use their own registered trademark and carton design on the air conditioners and cartons of their order. In case a customer wishes to use KANIONco brand name on the units and cartons, can consult with the appointed sales person whether KANIONco brand name is available for use in the specified country or region and not occupied by a sole agent. Certain benefits come with KANIONco brand name distributorship.
For more information please may get in contact with Kanion Service & Support Department at [email protected] or through https://www.kanionco.com/contactus.